feat: refactor sgclaw around zeroclaw compat runtime

third_party/zeroclaw/firmware/uno-q-bridge/app.yaml

@@ -0,0 +1,9 @@
+name: ZeroClaw Bridge
+description: "GPIO bridge for ZeroClaw — exposes digitalWrite/digitalRead via socket for agent control"
+icon: 🦀
+version: "1.0.0"
+
+ports:
+  - 9999
+
+bricks: []

third_party/zeroclaw/firmware/uno-q-bridge/python/main.py

@@ -0,0 +1,66 @@
+# ZeroClaw Bridge — socket server for GPIO control from ZeroClaw agent
+# SPDX-License-Identifier: MPL-2.0
+
+import socket
+import threading
+from arduino.app_utils import App, Bridge
+
+ZEROCLAW_PORT = 9999
+
+def handle_client(conn):
+    try:
+        data = conn.recv(256).decode().strip()
+        if not data:
+            conn.close()
+            return
+        parts = data.split()
+        if len(parts) < 2:
+            conn.sendall(b"error: invalid command\n")
+            conn.close()
+            return
+        cmd = parts[0].lower()
+        if cmd == "gpio_write" and len(parts) >= 3:
+            pin = int(parts[1])
+            value = int(parts[2])
+            Bridge.call("digitalWrite", [pin, value])
+            conn.sendall(b"ok\n")
+        elif cmd == "gpio_read" and len(parts) >= 2:
+            pin = int(parts[1])
+            val = Bridge.call("digitalRead", [pin])
+            conn.sendall(f"{val}\n".encode())
+        else:
+            conn.sendall(b"error: unknown command\n")
+    except Exception as e:
+        try:
+            conn.sendall(f"error: {e}\n".encode())
+        except Exception:
+            pass
+    finally:
+        conn.close()
+
+def accept_loop(server):
+    while True:
+        try:
+            conn, _ = server.accept()
+            t = threading.Thread(target=handle_client, args=(conn,))
+            t.daemon = True
+            t.start()
+        except Exception:
+            break
+
+def loop():
+    App.sleep(1)
+
+def main():
+    server = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+    server.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
+    server.bind(("127.0.0.1", ZEROCLAW_PORT))
+    server.listen(5)
+    server.settimeout(1.0)
+    t = threading.Thread(target=accept_loop, args=(server,))
+    t.daemon = True
+    t.start()
+    App.run(user_loop=loop)
+
+if __name__ == "__main__":
+    main()

third_party/zeroclaw/firmware/uno-q-bridge/python/requirements.txt

@@ -0,0 +1 @@
+# ZeroClaw Bridge — no extra deps (arduino.app_utils is preinstalled on Uno Q)

third_party/zeroclaw/firmware/uno-q-bridge/sketch/sketch.ino

@@ -0,0 +1,24 @@
+// ZeroClaw Bridge — expose digitalWrite/digitalRead for agent GPIO control
+// SPDX-License-Identifier: MPL-2.0
+
+#include "Arduino_RouterBridge.h"
+
+void gpio_write(int pin, int value) {
+  pinMode(pin, OUTPUT);
+  digitalWrite(pin, value ? HIGH : LOW);
+}
+
+int gpio_read(int pin) {
+  pinMode(pin, INPUT);
+  return digitalRead(pin);
+}
+
+void setup() {
+  Bridge.begin();
+  Bridge.provide("digitalWrite", gpio_write);
+  Bridge.provide("digitalRead", gpio_read);
+}
+
+void loop() {
+  Bridge.update();
+}

third_party/zeroclaw/firmware/uno-q-bridge/sketch/sketch.yaml

@@ -0,0 +1,11 @@
+profiles:
+  default:
+    fqbn: arduino:zephyr:unoq
+    platforms:
+      - platform: arduino:zephyr
+    libraries:
+      - MsgPack (0.4.2)
+      - DebugLog (0.8.4)
+      - ArxContainer (0.7.0)
+      - ArxTypeTraits (0.3.1)
+default_profile: default